Ghost 2 Immobiliser Problems

It is designed to safeguard vehicles from key cloning and hacking to protect them from key cloning and hacking, the Ghost 2 immobiliser is a discrete device that can be fitted without damaging your vehicle. It prevents you from starting your vehicle unless you press the correct sequence of buttons in your vehicle. This is similar to a mobile password.

Stop/Start

Ghost Immobilisers protect vehicles from being stolen by preventing the engine from starting until it is issued the correct PIN code. This is done without altering the vehicle, and is not detected by thieves. The unit communicates with the ECU on the CAN data bus to disable the vehicle. This system is similar to the one automobile manufacturers have used in their cars for years, however, the thief isn't able to add a key or use key relay technology to bypass it as they can with factory fitted systems.

Ghost is compatible with any vehicle that has an engine, which includes motorhomes, vans, cars and caravans, as well as bikes. The same system can be used on electric cars. It is an excellent alternative to steering wheel locks and wheel clamps that can be installed with minimal effort.

When the Ghost is activated, it will disable all buttons on your car and stop the ignition from starting without a PIN code. You can enter the code manually or through the Android or Apple app. If the incorrect code is entered, the app will show an indicator light. The Ghost will then not allow the vehicle to be restarted. This is a great deterrent, and in the event that the vehicle cannot be initiated, the criminal will continue to pursue a new area of.

The Ghost is a weatherproof, small device that can be hidden behind the most difficult-to-access parts of your vehicle. Installation takes between 20-30 minutes for each vehicle. It is also very easy to remove should you choose to move your vehicle around or give it away for valet parking or service. It is an TASSA (Tracking and Aftermarket Security Systems Association) insurance-approved system that is recognized by a few insurance companies. It also features a secure emergency Pin Code Override, and a Service/Valet mode which can be activated by pressing a button within the app or by using your key fob.

Disarm

Ghost immobilisers are not mechanical anti-theft devices that can be removed, are concealed inside the vehicle. They are nearly impossible to hack or bypass and, even if they are found, a thief is unable to start the engine. This is because a ghost immobiliser prevents key blocking, signal jamming, and device spoofing, all of which are methods that are commonly used by thieves to gain access to vehicles that have standard immobilisers.

An immobiliser functions by sending an instruction to the ECU (electronic control unit). If the incorrect code is received the vehicle will not be started as the engine won't start up. It is possible to disable a ghost immobiliser by using a software tool, but it's very difficult and time consuming to do so. The software can only be installed and operated by a authorized installer.

The Ghost immobiliser, a small device, is hidden in the vehicle's wiring loom. It is invisible to the naked eye after it has been installed. It won't show up on diagnostic systems, it does not have LED indicators, and it does not connect to the engine via the OBD port. It communicates in a silent manner via the CAN data circuit.

The system will not allow the vehicle to start until it is given an input PIN code that is entered by the user. This code is entered using buttons on the steering wheel or door panels, or central console. This how much Is A ghost immobiliser a better way to safeguard your car as it doesn't require a remote control or key fob.

In addition, Ghost offers the option of a service mode that can be activated through the application on your mobile phone. This allows you to hand over your keys to someone else for service or valet parking without entering the disarm sequence.

You should never remove the system on your Ghost by yourself, no matter whether it is in service mode. This could damage the engine. It is recommended that you contact an TASSA verified installer who can remove the system safely and properly. Our most recent GHOST immobilisers include a special fingerprint QR sticker hidden in various areas of your vehicle. They are linked to our security register. If the device is removed and then sold on the black market, this will allow you to trace the original owner.

Anti-Hijack

The anti-hijack function is an essential feature of the Ghost Immobiliser 2. This system functions as an intelligent key and is one of the most secure ways to ensure your car is safe from thieves. If the ignition switch is switched to on, and the vehicle is stationary for a period of 30 seconds, the Ghost system will stop the engine and turn on the warning lights on. This gives the driver or passengers time to press a hidden security button (depending on the vehicle) before the system is activated and the engine is again allowed to start.

The ghost 2 immobiliser review system, unlike other competitors, has a timer and controller unit that will close the fuel shut-off valve 14 after a predetermined period of time. This is regardless of whether the ignition remains on. The delay time must be sufficient to allow the person who was hijacked to leave the vehicle and stay a safe distance from the vehicle that is stalled before the system is reactivated.

In addition to the standard CANbus immobiliser blocking features of the Ghost system, it also comes with an extra security feature that blocks common hacking methods used to gain access to modern cars such as relay attacks, key range extending and ECU swapping. The Ghost system communicates in a silent manner and does not emit signals that could be detected by thieves using RF scanning or code-grabbing technology.

The Ghost system also comes with a Service / Valet mode that allows your vehicle to be temporarily re-started and driven without the need for an PIN code. This is perfect for parking your vehicle and have to leave it for a brief amount of time, for instance, to put your items in the boot, open a garage door. The system will exit service mode depending on the speed and time or via the simple PIN code entry process, giving you complete peace of mind that only YOU are able to utilize your vehicle!

Keyless Entry

Many customers are seeking out additional security measures due to the rising trend of contactless car theft. This is especially relevant for those who have invested time and money to customise their vehicle or own rare/expensive automobiles. Immobilisers with add-ons are a great way to deter this kind of theft because they will stop your vehicle from starting until the correct pin code has been entered, along with your key fob.

Immobilisers are designed to intercept the various circuits in a vehicle, including those that control the starter motor and the fuel pump. They can also disable the car stolen with ghost immobiliser alarm in order to draw attention and deter potential thieves.

These devices communicate with the engine control unit (ECU) via the CAN data circuit and they stop a burglar trying to bypass it by putting in a new ECU or using the key programmer. These immobilisers can be fitted in a discreet manner inside your vehicle, leaving no trace and are completely inaccessible to the tools sophisticated thieves use.

The Ghost immobiliser is unlike other systems that require the driver to wear a tag or an app. Instead, you can choose your own pin sequence by pressing a pattern on your steering, door panel, and centre console. The pin can be changed as frequently as you want, which means it is as secure as a credit card, and can be even more difficult to crack due to the fact that it requires at least 20 presses.

Ghost also has the option of a valet/service mode that allows you to disable the system if your vehicle is going to be handed over to valet parking or services, enabling it to work within certain parameters such as a 30mph speed limit which means you don't need to worry about your car being driven at a reckless speed. The system can be activated by using the original key or corresponding entry code.

Installed by our reputable installers It is the most secure and efficient aftermarket CAN-immobiliser available. It is also fully certified by Thatcham for insurance purposes. The Ghost 2 immobiliser is also equipped with six QR fingerprint labels and an ISR contact card that contains your unique QR code and an emergency code that is secure, all of which can be kept in the purse or wallet of your car.