Double Glazing Lock Repairs

The use of high-quality locks on your doors and windows helps to prevent burglars from gaining access to your home. In general, they don't enjoy breaking glass or squeezing through windows that are not closed.

However, some double glazing owners have had issues with their door or Window Doctor window lock after it's been installed. Fortunately, these issues can be fixed without having to pay for new double glazing.

Broken or faulty locks

A locksmith can fix your uPVC window replacement or door lock if it is damaged or broken. They can fix hinges, striker plates, and locks for your double glazing. They can also move the cylinder in order to correct any misalignment that may be causing your handle to work properly.

If the key fits into the lock, but it doesn't turn or is difficult to insert the mechanism could be locked up. Grease or dirt can be trapped in the mechanism. If this is the case, then it may be possible to clean the lock and lubricate it. It is essential to use a dry lubricant, such as teflon or graphite, rather than oil, which can attract dirt and adhere to the inside of the mechanism. After lubricating, insert the key into the lock and turn it. The lubricant should make through the mechanism and the lock should be able turn with ease.

Loose screws within the lock mechanism are another reason for a malfunctioning lock. They can become loose and fall out or break off completely, preventing the lock from working correctly. The screws can be tightened with a screwdriver, but be careful not to over tighten them. This could cause damage to the internal components.

A faulty lock can be dangerous for you and your family members, particularly if you have young children. They could easily open the door without knowing and gain access to your house. If you're worried that this could occur, a professional locksmith can help you secure the double-glazed doors.

Misty Glaze is a professional uPVC company in Lancing that can repair all types faulty and broken mechanisms on uPVC doors and windows. We can also alter your uPVC or double glazing locking system to meet your specific needs, which means that in a lot of cases replacement doors and windows are not necessary.

Handles that are damaged or faulty

Many double glazed windows feature a multi-point lock as part of the overall security package. This is a great choice for those who are concerned about potential burglars trying to gain access to their home. It is also a good idea to ask your locksmith about anti-lift blocks that can be installed with the locks already in place and ensure that your window is locked in the closed position.

Handle locks are often damaged or fail. They are the first thing a criminal will employ to open your window. Luckily, the good news is that this is one of the most simple parts to fix.

Modern uPVC handles and aluminium handles come with the multi-point locking mechanism referred to as Espagnolette which is designed to ward off forced entry. This security upgrade is offered as an option on new uPVC windows. Older style uPVC and aluminum handles can be upgraded to lock bolts that shoot also as an optional feature on all new double-glazed window installations.

It is essential to fix a handle as soon as you can if it's damaged. A damaged handle could prevent the window from closing properly and permit drafts to get in. It could also be a vulnerability that thieves who are opportunistic could exploit and put your family's possessions and your personal belongings at risk.

To repair the broken mechanism, first gain access to the window frame, then take off the damaged handle. The gearbox can then be accessed to determine the type of gearbox used to open the handle. This will allow to replace the handle that matches the profile and internal window frame mechanisms.

Once the mechanism has been replaced the handle can then be re-affixed using the original screws but we would recommend replacing them with larger ones because this will ensure a more secure fit. The final step is to apply a layer of clear sealant to protect the handle from further corrosion. After this step is completed your window will be functioning again at a fraction the cost of replacing it.

Hinges that are broken or faulty

If your windows don't close properly, draughts could be able to enter, your home's security barriers will weaken and there's an increased risk of damp or water damage. Windows hinges that break or fail are a common problem and are easily fixed.

If you have a uPVC window that isn't able to open or close and close, it's likely that your hinges are damaged or broken and need to be replaced. While most window manufacturers require you to purchase a whole new window to resolve this simple issue We're able to repair the hinges that are damaged and save you money.

Window hinges are often damaged through repeated use, or they are weakened over time by corrosion. If you find a damaged hinge, it's important to take steps to prevent further damage by taking care not to make the window doctor, www.repairmywindowsanddoors.co.uk, swing to open or close.

You can locate the appropriate parts for your hinge by identifying its type. Maco, Mila and Roto are all brands of window hinges. It is recommended to consult a professional in this case to avoid the mistake of purchasing parts that aren't compatible with your current hardware and could cause further damage.

The hinges that are not working properly can be a huge problem for uPVC doors and windows. They can be an important source of noise, and they could also allow water to infiltrate your windows.

To fix this issue, first make sure whether the pin barrel on both hinge halves is aligned. If it isn't, tap the head pin with an hammer to create an arc in the hinge barrel. This will help to keep the pin in place. Then, ask a helper to hold the door as you take the hinges and hinges from both the doorjamb as well as the door. Replace the hinges and attach screws with glue. Finally, while the glue is drying, secure the hinges by using clamps or weights.

Once you have repaired your hinges, you are able to put the door back in place. You could also reattach the handle. Replace the screws with wood dowels of the same length as the original screw to ensure that they are compatible.

Broken or Faulty Glass

uPVC Windows can become damaged over time, even though they are great at keeping out the cold and keeping warmth. This can be the case with broken or damaged glass as well as defective locks. This is a problem that can be very expensive when neglected. It also can detract from the appearance of your home and may lead to a loss of insulation, so it is essential to fix any damage as soon as you can.

If the glass is broken but isn't shattered it is usually possible to repair it yourself with the proper tools and methods. Make sure the area around the broken glass is free of debris to ensure that fragments don't cause injury or trip hazards. Next, remove any broken pieces and dispose of them in a safe manner. Apply masking tape over the entire area. This will stop glass shards from sticking to your skin and splintering when you move them. If you're dealing with a double-pane window, it's a good idea to prepare the glass before gluing it back into place so that you are sure you'll have enough space finish the project.

Before applying the glue clean the surface of the broken frame and the glass with an unclean, dry cloth. Follow the application and curing instructions, which may vary from product-to-product. You may need to clamp the cracked glass with clamps made of lightweight materials designed to hold delicate materials, based on the angle.

After the adhesive has fully set, carefully place the glass inside the window frame, ensuring it's flush with the edge of the frame and there are no gaps between the glass and the window sash. Avoid flexing the glass as you reinstall it in order to weaken the seal. This could lead to water infiltration or condensation.

If you have a glass window that is completely broken or has larger cracks, contact a professional glazier such as O'Brien(r) to organise a replacement. It's important to act quickly in the event of broken glass.