Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they don't get rusty or decay.

Regularly cleaning and lubricating UPVC windows and repair my windows And Doors doors is vital. This will prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home and may even be fatal. You should take the time to ensure that your windows are in good condition.

Single-pane windows are relatively simple to replace, and they typically fit into frames of the past easily. If you have double-paned windows that are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this instance you'll need find some plastic spacers to aid the new pane in being able to fit perfectly into the frame of the window.

If you plan to attempt to remove the window panes by yourself, it is essential to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards fall onto the fabric, not onto the floor, where they could be trampled under.

Once the glass is removed from the window, it's best to cover the gap with clear packaging tape or duct tape to prevent drafts and water from entering the property until a professional is able to come out and repair the window. It also acts as a barrier, deterring any intruders from gaining entry into your home. If the gap is particularly large, you may think about the security door with an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber sash windows. However, over time they can suffer from a variety of issues, including sagging. A window that is sagging can cause problems with light, draughts and even security. It is crucial to act when you discover that your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window which is sagging. First, you'll need to open the windows to get at the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Once you've repositioned the hinges, close your window and check for fitting. If you're satisfied with the fit of the window, you can tighten screws to keep them in the right position.

If you can't reposition the hinges you may require replacing the seal. Rubber seals can dry out and lose their elasticity over time, leading them to lose their tightness. It is crucial to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

uPVC handles could also loosen. This is typically caused by screws that have loosened over time, but it could be caused by the handle mechanism wearing out. Fortunately, it's easy to fix the handle of a window that is loose yourself. First, you'll need close your window and do an experiment to ensure that it fits. The joint at the corners of the sash should align with the joint on the casing. If it does not, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you're waking up to damp floors and mouldy walls every time it rains it's crucial to take action. The leaks of water from windows do not only lead to the degradation of your home's structure but also hinder your efforts to control the temperature inside your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix and should be undertaken by any DIY expert. Depending on how serious the problem is, the old caulking may need to be removed. It is essential to keep in mind that when it is about uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area harder to clean and decrease the efficiency of your energy usage.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious situations, you may need to think about replacing the window.

Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and can quickly spread across the house.

It is also important to remember that if the leakage originates from the glass of your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and open in a breeze it could be hinges at the fault. They can be repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Like any mechanical component hinges will be damaged over time. It's very simple to change a window hinge, but it's easier if someone helps you hold the frame.

It is also worth checking that the uPVC hinges are being opened and closed in the correct direction. You can check this by checking for the arrows on each hinge. This indicates the direction in which the window should be opened.

The issue could be caused by opening the window incorrectly or by a poor installation in the factory. Sending us a picture via our website will often resolve the problem. We are always happy to offer assistance.

It is also crucial to ensure that the hinges are lubricated regularly. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window to operate and close more easily. It can also stop corrosion and reduce the risk of sticking. This should be done at least once a year. WD40 and other solvent based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by various factors. The hinges may also become disaligned as a result of wear, causing an opening where the sash meets frame. If they're beyond repair, it might be necessary to get them re-aligned. The interlock may also become disaligned. It is located on the hinge's side and may need to be cleaned. In some instances, it may be necessary to replace these.

The seals may wear out or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping can help stop draughts. Replace the upvc windows with low-emissivity glass. This will help to regulate indoor temperatures, and reduce the possibility of draughts.

The final method to cut down on the amount of draughts is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler, which can be placed over your window sill. They will help block out cold air and keep your home warm and cozy!

With a little regular maintenance and Repair My Windows And Doors your windows made of upvc repairs will provide a great level of security and insulation for your home. It is crucial to realize that windows last for a certain period of time and there may come a point where it is more cost-effective to replace them rather than repair them. If you are experiencing issues with your Upvc windows, it is recommended to seek assistance from a professional as soon as you can.